CORNER BEADS
PRODUCT
NUMBER
FINISH
THICKNESS 		INSULATION
THICKNESS		 DIMENSIONS PIECES
PER BOX

CB138E 1/16 ALL 1-3/8" x 1-3/8", perforated flanges. 100
(8', 10')

Corner Bead - Designed by Vinyl Corp. to be used in EIFS PB wall and ceiling systems. This new design has larger perforations allowing matrix to easily flow thru and anchor to substrate. Reinforcing the corner. Used for those conditions when a more durable corner is required.

Conforms to ASTM D1784-81 cell classification 13244C
CB158E 1/16 ALL 1-5/8" x 1-5/8", perforated flanges. 75
(8',10')

Corner Bead - Designed by Vinyl Corp. with slightly wider flanges, but with all of the features of the CB138E.

Conforms to ASTM D1784-81 cell classification 1344C

   PB STARTER STRIP/CASING BEADS       
     "PATENT NUMBER"   5,003,743
PRODUCT
NUMBER
FINISH
THICKNESS 		INSULATION
THICKNESS		 DIMENSIONS PIECES
PER BOX

CBS75-16 1/16 3/4 2" back flange, 5/8" perforated flange 50
CBS100-16 1/16 1 45
CBS150-16 1/16 1-1/2 40
CBS200-16 1/16 2 26

EIFS PB Starter Strip/Casing Beads - Designed by Vinyl Corp. as a base support starter strip or perimeter casing bead for exterior insulated wall and ceiling systems. Perforated flange allows matrix to easily flow thru and anchor to substrate. All have Vinyl Corpıs patented ³Key Lock² splice to reinforce butt joints. Caulk all Intersections, Butt Joints and Ends.

Conforms to ASTM D1784-81 cell classification 13244C

   PB STARTER STRIP/CASING BEADS  (with drip)      
     "PATENT NUMBER"   5,003,743

PRODUCT
NUMBER
FINISH
THICKNESS 		INSULATION
THICKNESS		 DIMENSIONS PIECES
PER BOX

CBS75-16D 1/16 3/4 2" back flange, 5/8" perforated flange, with drip leg. 45
CBS100-16D 1/16 1 40
CBS150-16D 1/16 1-1/2 35
CBS200-16D 1/16 2 25

EIFS PB Starter Strip/Casing Beads (With Drip) - Designed by Vinyl Corp. as a base support starter strip with drip leg for exterior insulated wall. Perforated flange allows matrix to easily flow thru and anchor to substrate. Drip leg moves moisture away from openings or foundation wall. All have Vinyl Corp's patented "Key Lock" splice to reinforce butt joints. Caulk all Intersections, Butt Joints and Ends.

Conforms to ASTM D1784-81 cell classification 13244C
   PB STARTER STRIP/CASING BEADS (reinforced)      
      "PATENT NUMBER"   5,003,743
PRODUCT
NUMBER
FINISH
THICKNESS 		INSULATION
THICKNESS		 DIMENSIONS PIECES
PER BOX

PRE 100-16 1/16 1 1" back flange, 1-1/8" perforated flange. 60
PRE 150-16 1/16 1-1/2 40
PRE 200-16 1/16 2 25

EIFS PB Prefabricated Panel Edge - Designed for systems that are amnufactured into panels for job installation. Vinyl Corp's patented "Key Lock" reinforces butt joints.

Conforms to ASTM D1784-81 cell classification 13244C
   PB CONTROL JOINT
   (surface application/with removable tape)
PRODUCT
NUMBER
FINISH
THICKNESS 		INSULATION
THICKNESS		 DIMENSIONS PIECES
PER BOX

 

 CJV-16E 1/16 ALL 3/16" "V" REVEAL 1-1/8" perforated flanges. 60

EIFS PB Control Joint (With Removable Tape) - Designed by Vinyl Corp. to relieve stress, caused by expansion and contraction, in large areas of walls and ceilings. Tape protects Deep "V" expansion slot during construction. Large perforations allow matrix to easily flow thru and anchor to substrate.Recommended usage is for every 130 -140 sq. ft, with no one side being longer than 15 ft. Caulk all Intersections, Butt Joints and Ends.

Conforms to ASTM D1784-81 cell classification 13244C

       
  Vinyl Corp Logo 1-800-648-4695 • 305-477-6464
Fax: 305-477-4108 • Toll Free Fax: 1-888-9583